March 19, 2021

About the four application areas of slewing bearings

Compared with standard bearings, Fenghe slewing bearings provide solutions in terms of reducing assembly time, simplifying the structure and increasing the capacity of the entire system. […]
January 22, 2021

slewing bearing assembly

Slewing bearing is a kind of large bearing with special structure, which can bear the overall load such as axial load, radial load and overturning load. […]
January 20, 2021

slewing bearing wear measurement

During the use of the slewing bearing, measurement and inspection are used to avoid possible wear rings or to detect wear at an early stage. This […]
September 22, 2020

How to deal with the failure of slewing bearing

The failure of slewing bearing should be dealt with from the following aspects (1) Confirm the failure reason of the slewing bearing. (2) Formulate a treatment […]
September 15, 2020

Analysis of cause of failure of slewing bearing

The main reasons for the failure of slewing bearing are as follows: (1) The bearing capacity selected in the design and selection is relatively small The […]
September 15, 2020

What happens when a slewing bearing fails?

(1) When the rotary resistance increases, the motor will be overloaded and the rotary speed will be slower than normal. In severe cases, it can’t turn […]
September 15, 2020

Common structural forms of slewing ring bearings

The slewing bearing is mainly composed of inner and outer rings or upper and lower rings, rolling bodies, seals, etc., among which the main upper and […]
September 15, 2020

Application of Slewing Bearing in Stacker Reclaimer

The supporting forms of the slewing device of the stacker reclaimer are mainly trolley type, slewing bearing type, and tapered roller type, and slewing bearing is […]
August 31, 2020

Slewing Bearing For Excavator

Slewing Bearing For Excavator It is composed of a turntable, a slewing bearing and a slewing mechanism. The outer ring of the slewing bearing is connected […]