SE12 | PE12 SLEWING DRIVE

Drawing or Curve

Required parameters for slewing drive selection

  • Service environment (high/low temperature)
  • Installation mode: horizontal/vertical
  • Bearing capacity (with moment arm to provide the length of the moment arm)
  • Load (table) size
  • Speed
  • Whether it is equipped with a hydraulic motor (if the motor is provided by ourselves, if it cannot be installed directly, we can provide a transition flange and connecting shaft)

slewing drive Output
Torque		 Tilting Moment Torque
 Holding Torque Static Axial Load Static Radial Load Dynamic Axial Load Dynamic Radial Load Speed Reducing Ratio Tracking Precision Self-lock Weight
SE12 7.5 KN.m 54.3 KN.m 43 KN.m 475 KN 190 KN 114 KN 100 KN 78:1 0.17° YES 61KG
5532 lbf.ft 40×10³ lbf.ft 32×10³ lbf.ft 107×10³ lbf 43×10³ lbf 26×10³ lbf 23×10³ lbf
PE12 7.5 KN.m 54.3 KN.mKN.m 43 KN.m 475 KN 190 KN 114 KN 100 KN 78:1 0.1° YES 61KG
5532 lbf.ft 40×10³ lbf.ft 32×10³ lbf.ft 107×10³ lbf 43×10³ lbf 26×10³ lbf 23×10³ lbf

Typical applications