SE14 | PE14 SLEWING DRIVE
Required parameters for slewing drive selection
- Service environment (high/low temperature)
- Installation mode: horizontal/vertical
- Bearing capacity (with moment arm to provide the length of the moment arm)
- Load (table) size
- Speed
- Whether it is equipped with a hydraulic motor (if the motor is provided by ourselves, if it cannot be installed directly, we can provide a transition flange and connecting shaft)
slewing drive | Output Torque |
Tilting Moment Torque |
Holding Torque | Static Axial Load | Static Radial Load | Dynamic Axial Load | Dynamic Radial Load | Speed Reducing Ratio | Tracking Precision | Self-lock | Weight |
---|---|---|---|---|---|---|---|---|---|---|---|
SE14 | 8 KN.m | 67.8 KN.m | 48 KN.m | 555 KN | 222 KN | 133 KN | 117 KN | 85:1 | 0.17° | YES | 64KG |
5900 lbf.ft | 50×10³ lbf.ft | 35×10³ lbf.ft | 125×10³ lbf | 50×10³ lbf | 30×10³ lbf | 26×10³ lbf | |||||
PE14 | 8 KN.m | 67.8 KN.m | 48 KN.m | 555 KN | 222 KN | 133 KN | 117 KN | 85:1 | 0.1° | YES | 64KG |
5900 lbf.ft | 50×10³ lbf.ft | 35×10³ lbf.ft | 125×10³ lbf | 50×10³ lbf | 30×10³ lbf | 26×10³ lbf |