SE17 | PE17 SLEWING DRIVE

Drawing or Curve

Required parameters for slewing drive selection

  • Service environment (high/low temperature)
  • Installation mode: horizontal/vertical
  • Bearing capacity (with moment arm to provide the length of the moment arm)
  • Load (table) size
  • Speed
  • Whether it is equipped with a hydraulic motor (if the motor is provided by ourselves, if it cannot be installed directly, we can provide a transition flange and connecting shaft)

slewing drive Output
Torque		 Tilting Moment Torque
 Holding Torque Static Axial Load Static Radial Load Dynamic Axial Load Dynamic Radial Load Speed Reducing Ratio Tracking Precision Self-lock Weight
SE17 10 KN.m 135.6 KN.m 72.3 KN.m 970 KN 390 KN 235 KN 205 KN 102:1 0.15° YES 105KG
7400 lbf.ft 100×10³ lbf.ft 53×10³ lbf.ft 218×10³ lbf 88×10³ lbf 53×10³ lbf 46×10³ lbf
PE17 10 KN.m 135.6 KN.m 72.3 KN.m 970 KN 390 KN 235 KN 205 KN 102:1 0.1° YES 105KG
7400 lbf.ft 100×10³ lbf.ft 53×10³ lbf.ft 218×10³ lbf 88×10³ lbf 53×10³ lbf 46×10³ lbf

Typical applications