SE21 | PE21 SLEWING DRIVE
Required parameters for slewing drive selection
- Service environment (high/low temperature)
- Installation mode: horizontal/vertical
- Bearing capacity (with moment arm to provide the length of the moment arm)
- Load (table) size
- Speed
- Whether it is equipped with a hydraulic motor (if the motor is provided by ourselves, if it cannot be installed directly, we can provide a transition flange and connecting shaft)
| slewing drive | Output Torque |
Tilting Moment Torque |
Holding Torque | Static Axial Load | Static Radial Load | Dynamic Axial Load | Dynamic Radial Load | Speed Reducing Ratio | Tracking Precision | Self-lock | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SE21 | 15 KN.m | 203 KN.m | 105.8 KN.m | 1598 KN | 640 KN | 335 KN | 335 KN | 125:1 | 0.15° | YES | 149KG |
| 11000 lbf.ft | 150×10³ lbf.ft | 78×10³ lbf.ft | 359×10³ lbf | 144×10³ lbf | 87×10³ lbf | 75×10³ lbf | |||||
| PE21 | 15 KN.m | 203 KN.m | 105.8 KN.m | 1598 KN | 640 KN | 335 KN | 335 KN | 125:1 | 0.1° | YES | 149KG |
| 11000 lbf.ft | 150×10³ lbf.ft | 78×10³ lbf.ft | 359×10³ lbf | 144×10³ lbf | 87×10³ lbf | 75×10³ lbf |
