slewing drive se25

SE25 | PE25 SLEWING DRIVE

Drawing or Curve


Required parameters for slewing drive selection

  • Service environment (high/low temperature)
  • Installation mode: horizontal/vertical
  • Bearing capacity (with moment arm to provide the length of the moment arm)
  • Load (table) size
  • Speed
  • Whether it is equipped with a hydraulic motor (if the motor is provided by ourselves, if it cannot be installed directly, we can provide a transition flange and connecting shaft)

slewing drive Output
Torque
Tilting Moment Torque
Holding Torque Static Axial Load Static Radial Load Dynamic Axial Load Dynamic Radial Load Speed Reducing Ratio Tracking Precision Self-lock Weight
SE25 18 KN.m 271 KN.m 158.3 KN.m 2380 KN 945 KN 590 KN 470 KN 151:1 0.15° YES 204KG
13300 lbf.ft 200×10³ lbf.ft 117×10³ lbf.ft 531×10³ lbf 212×10³ lbf 133×10³ lbf 100×10³ lbf
PE25 18 KN.m 271 KN.m 158.3 KN.m 2380 KN 945 KN 590 KN 470 KN 151:1 0.1° YES 204KG
13300 lbf.ft 200×10³ lbf.ft 117×10³ lbf.ft 531×10³ lbf 212×10³ lbf 133×10³ lbf 100×10³ lbf

Typical applications