SE3 | PE3 SLEWING DRIVE

Drawing or Curve

Required parameters for slewing drive selection

  • Service environment (high/low temperature)
  • Installation mode: horizontal/vertical
  • Bearing capacity (with moment arm to provide the length of the moment arm)
  • Load (table) size
  • Speed
  • Whether it is equipped with a hydraulic motor (if the motor is provided by ourselves, if it cannot be installed directly, we can provide a transition flange and connecting shaft)

slewing drive Output
Torque		 Tilting Moment Torque
 Holding Torque Static Axial Load Static Radial Load Dynamic Axial Load Dynamic Radial Load Speed Reducing Ratio Tracking Precision Self-lock Weight
SE3 400 N.m 1100 N.m 2000 N.m 30 KN 16.6 KN 9.6 KN 8.4 KN 62:1 0.2° YES 12KG
295 lbf.ft 811 lbf.ft 1476 lbf.ft 6744 lbf 3732 lbf 2158 lbf 1888 lbf
PE3 400 N.m 1100 N.m 2000 N.m 30 KN 16.6 KN 9.6 KN 8.4 KN 62:1 0.1° YES 12KG
295 lbf.ft 811 lbf.ft 1476 lbf.ft 6744 lbf 3732 lbf 2158 lbf 1888 lbf

Typical applications