SE5 | PE5 SLEWING DRIVE

Drawing or Curve

Required parameters for slewing drive selection

  • Service environment (high/low temperature)
  • Installation mode: horizontal/vertical
  • Bearing capacity (with moment arm to provide the length of the moment arm)
  • Load (table) size
  • Speed
  • Whether it is equipped with a hydraulic motor (if the motor is provided by ourselves, if it cannot be installed directly, we can provide a transition flange and connecting shaft)

slewing drive Output
Torque		 Tilting Moment Torque
 Holding Torque Static Axial Load Static Radial Load Dynamic Axial Load Dynamic Radial Load Speed Reducing Ratio Tracking Precision Self-lock Weight
SE5 600 N.m 1800 N.m 5000 N.m 76 KN 22.6 KN 13.8 KN 11.8 KN 62:1 0.2° YES 12KG
443 lbf.ft 1328 lbf.ft 3688 lbf.ft 17085 lbf 5081 lbf 3102 lbf 2653 lbf
PE5 600 N.m 1800 N.m 5000 N.m 76 KN 22.6 KN 13.8 KN 11.8 KN 62:1 0.1° YES 12KG
443 lbf.ft 1328 lbf.ft 3688 lbf.ft 17085 lbf 5081 lbf 3102 lbf 2653 lbf

Typical applications