SE9 | PE9 SLEWING DRIVE

Drawing or Curve

Required parameters for slewing drive selection

  • Service environment (high/low temperature)
  • Installation mode: horizontal/vertical
  • Bearing capacity (with moment arm to provide the length of the moment arm)
  • Load (table) size
  • Speed
  • Whether it is equipped with a hydraulic motor (if the motor is provided by ourselves, if it cannot be installed directly, we can provide a transition flange and connecting shaft)

slewing drive Output
Torque		 Tilting Moment Torque
 Holding Torque Static Axial Load Static Radial Load Dynamic Axial Load Dynamic Radial Load Speed Reducing Ratio Tracking Precision Self-lock Weight
SE9 6.5 KN.m 33.9 KN.m 38.7 KN.m 338 KN 135 KN 81 KN 71 KN 61:1 0.17° YES 49KG
4794 lbf.ft 25×10³ lbf.ft 29×10³ lbf.ft 76×10³ lbf 30×10³ lbf 18×10³ lbf 16×10³ lbf
PE9 6.5 KN.m 33.9 KN.m 38.7 KN.m 338 KN 135 KN 81 KN 71 KN 61:1 0.1° YES 49KG
4794 lbf.ft 25×10³ lbf.ft 29×10³ lbf.ft 76×10³ lbf 30×10³ lbf 18×10³ lbf 16×10³ lbf

Typical applications