slew drive
drawing template
August 15, 2019SE3 | PE3 SLEWING DRIVE
Required parameters for slewing drive selection
- Service environment (high/low temperature)
- Installation mode: horizontal/vertical
- Bearing capacity (with moment arm to provide the length of the moment arm)
- Load (table) size
- Speed
- Whether it is equipped with a hydraulic motor (if the motor is provided by ourselves, if it cannot be installed directly, we can provide a transition flange and connecting shaft)
| slewing drive | Output Torque |
Tilting Moment Torque |
Holding Torque | Static Axial Load | Static Radial Load | Dynamic Axial Load | Dynamic Radial Load | Speed Reducing Ratio | Tracking Precision | Self-lock | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SE3 | 400 N.m | 1100 N.m | 2000 N.m | 30 KN | 16.6 KN | 9.6 KN | 8.4 KN | 62:1 | 0.2° | YES | 12KG |
| 295 lbf.ft | 811 lbf.ft | 1476 lbf.ft | 6744 lbf | 3732 lbf | 2158 lbf | 1888 lbf | |||||
| PE3 | 400 N.m | 1100 N.m | 2000 N.m | 30 KN | 16.6 KN | 9.6 KN | 8.4 KN | 62:1 | 0.1° | YES | 12KG |
| 295 lbf.ft | 811 lbf.ft | 1476 lbf.ft | 6744 lbf | 3732 lbf | 2158 lbf | 1888 lbf |
